OPERATION
4.5.3 A ttachi
ng an A-Series Header
A30-D, A30-S, and A 40-D headers can be attached to an M155 or M205 Self-Propelled Windrower. For attachment
procedure, refer to the section for your specific windrower model.
Refer to the following instructions based on the type of center-link installed on yo u r windrower:
• Hydraulic Link with Optional Self-Alignment Kit, page 238
• Attaching an A-Series Header: Hydraulic Center-Link without Self-Alignment, page 238
• Attaching an A-Series Header: Mechanical Center-Link, page 245
147649 237 Revision A
To Next Page
Loading...
