REFERENCE
If Fleetguard ES Compleat
®
is unavailable, use a coolant concentrate or prediluted coolant intended for use with
heavy duty diesel engines and w ith a minimum of the following chemical and physical properties:
• Provides cylin der cavitation protection a ccording to fleet study run at or above 60% load capacity.
• Protects the cooling system metals (cast iron, aluminum alloys, and copper alloys such as brass) from corrosion.
The additive package must be part of one of the following coolant mixtures:
• Ethylene glycol or propylene glycol base prediluted (40–60%) heavy duty c oolant.
• Ethylene glycol or propylene glycol base heavy duty coolant concentrate in a 40–60% mixture of concentrate with
quality water.
Water quality is important to the performance of the cooling system. Distilled, d eionized, or demineralize d water is
recommended for mixing with ethylene glycol and propylene glycol base engine coolant concentrate.
IMPORTAN T:
Do NOT use cooling system s ealing additives or antifreeze that contains sealing additives.
8.2.4 F ilt
er Part Numbers
Table8.16M155FilterPartNumbers
Filter Part Number
Engine oi
l filter
MD #11197
4
Charge oil filter MD #112419
Return oil filter MD #151975
Primar
yfuelfilter element
MD #111
972
Fuel strainer filter (Breather) MD #111608
Secondary fuel filter element MD #166312
Fuel
filler filte r
MD #1
63989
Return air filter MD #109797
Primary element (Cab) MD #111060
Pr
imary air filter element
MD
#111954
Safety air filter element MD #111955
147649 467 Revision A
To Next Page
