TROUBLESHOOTING
6.4 Header Drive Troubleshooting
Symptom
Problem
Solution Section
Header DRIVE switch in cab
not engaged
Engage H EADE R DRIVE switch.
Engaging and
Disengaging the
Header, page 202
Operator Presence switch not
closed or faulty
Occupy operator’s seat or replace
switch. Contact your Dealer.
Header drive not
engaging
Appropriate solenoid not
being energized by activating
switch
Relief valve settin g to o lo w
Contact Dealer.
Contact Dealer
Header drive lacks
power
Header drive overload Reduce g round speed.
Driving Forwa rd
in Engine-Forward
Mode, page 170
Warning alarm
sounds
Relief valve setting too low Contact Dealer. Contact Dealer
147649 437 Revision A
To Next Page
Loading...
