OPTIONS AN D ATTACHMENTS
7.1.17 Rotary
Header Drive Hydraulics (13-foot)
Used to allow operation of a 13-foot rotary header. The kit includes header drive plumbing and
installation instructions.
MD #B5510
Instructions are included in the bundle.
• MD #169544 13-foot R80 and R85 attached to M150 or M155
MD #B5511
Instructions are included in the bundle.
• MD #169545 13-foot R80 and R85 attached to M200
7.1.18 Self-Aligning Center-Link
Allows the center-link cylinder to be hydraulically positioned and connected to the header without leaving the
operator’s station.
Hydraulic center-link (MD #B4650) must be installed.
MD #B4802
Instruction MD #169004 included in the bundle.
7.1.19 Swath Roller
An axle-
mounted swath roller increases the windrow’s resistance to wind disturbance, especially in canola or
simila
r crops. It can be fitted with a h ydraulic lift with in-cab controls.
Contac
t your MacDon Dealer for informat ion .
7.1.20
Towing Harness
The towing harness is used together with the weight box when towing a D-Series draper header e quipped with
slow speed transport option behind the windrower.
MD #B5280 - Weight box harness only. Includes hitch pin and wiring for use with slow speed header transport option.
Instruction MD #169278 is included in the bundle.
7.1.21 Warning Beacons
Two rotating warning beacons that are designed for installation onto the pre-wired cab. The kit includes the
beacons, a s witch, mounting hardware, and instructions. The beacons are standard equipment for exported
windrowers, and are optional for North America. Fits 2009 and newer machines.
MD #B5582
Instruction MD #169538 is included in the bundle.
147649 450 Revision A
To Next Page
Loading...
