OPERATOR’S STATION
3.5 Seat Belts
The windrower is equipped with a seat belt on the operator’s and trainer’s seats.
WARNING
The seat belt can help ensure your safety if it is used and maintained.
• Before starting the engine, securely fasten your seat belt. Ensure that anyone occupying the trainee’s
seat is secured by a seat belt as well.
• Never wear a seat belt loosely or with slack in the belt system. Never wear the belt in a twisted condition
or pinched between the seat structural members.
To fasten seat belt:
1. Pull belt with metal eye (A) at right side completely
across your body.
2. Push the metal eye (A) into the buckle (B) until it locks.
3. Adjust the positio n of the belt as low on your bo d y
as possible.
To release seat belt:
4. Push the red button (C) in the end of the buckle.
5. Separate the buckle (B) and metal eye (A).
Figure 3.14: Seat Belt
147649
4
7
Revision A
To Next Page
Loading...
