7 Options and Attachments
7.1 Options and Attachments
The following options and attachments are available through your MacDon Dealer. The Dealer will require the part
number (MD #) to determine pr icin g an d availability.
7.1.1 A M/FM Radio
The cab is pr
e-wired for easy installation of a DIN “E”-style audio component available from your MacDon Dealer.
Speakers ar
e factory-installed.
For instal
lation details, refer to the unloading and assembly instructions supplied with your windrower.
7.1.2 A uto
matedSteeringSystems
A MacDon-approved automated steering system is available from MacDon Dealers that provide installation and
support services.
MacDon windrowers are prewired for either the Trimble
®
AutoPilot
™
hydraulically integrated steering system or the
Trimble
®
EZ-Pilot
®
wheel/column based assisted steering system. The windrower’s ground speed lever (GSL) has
an automated steering (autosteer) engage switch and the Trimble
®
display mounting kit MD #183348 is supplied in
the cab.
The Trimble
®
AutoPilot
™
system requires the MacDon automated steering hydraulic interface kit MD #B5589.
Installation instruction MD #169539 is included in the bundle.
Other GPS providers may supply parts in their vehicle specific installation packages or make installation kits available
through MacDon D ealers.
7.1.3 B ooster Spring Kit (External)
Available for headers over 6000 lb (2724 kg) to increase the float capacity.
MD #B4659 - Booster Spring Kit (external) includes two springs (one for each side) and mounting bracket.
Instruction MD #169032 is included in the bundle.
7.1.4 B ooster Spring Kit (Internal)
An ad
ditional spring that is installed inside the header lift spring for increased float capacity.
MD #B
5303 - includes one spring and castings for one side of the windrower.
Ins
truction MD #169316 is included in the bundle.
7.1
.5 Draper Header Case Drain Kit
The Draper H eader Case Drain kit must be installed when attaching a MacDon D50, D60, or D65 draper header
with an upper cross auger (UCA), but without double draper drive. Case Drain Kit (MD #B5842) is NOT required for
double draper drive headers equipped with kits (MD #B5606) and (MD #B5653).
MD #B5842
147649
4
47
Revision A