NEC Univerge SV9100 - Page 1275

1275
Program
Number
Program Name/Description
Input Data
Default
16-01-05
Department Group Basic Data Setup –
Extension Group All Ring Mode Operation
Determine whether calls ringing a Department
Group should ring all extensions in the group
simultaneously automatically or manually when
using the service code defined in Program
11-12-09. When set to 1 only ICM and DID
calls ring all stations in the Department Group.
0 = Manual
1 = Automatic
0
16-01-06
Department Group Basic Data Setup – STG
Withdraw Mode
Set the STG withdraw mode for each
department group.
0 = Disable (Camp On)
1 = Enable (Overflow Mode)
0
16-01-07
Department Group Basic Data Setup – Call
Recall Restriction for STG
Determine whether or not an unanswered call
transferred to a Department Group should
recall the extension from which it was
transferred.
0 = Disable (Recall)
1 = Enable (No Recall)
0
16-01-09
Department Group Basic Data Setup –
Department Hunting No Answer Time
Set how long a call rings a Department Group
extension before hunting occurs.
0 ~ 64800 seconds
15
16-01-10
Department Group Basic Data Setup –
Enhanced Hunt Type
Set the type of hunting for each Department
Group.
0 = No queuing
1 = Hunting When Busy
2 = Hunting When Not
Answered
3 = Hunting When Busy or No
Answer
0
16-02-01
Department Group Assignment for
Extensions
Set up the Department Group called by the pilot
number and the extension priority when a group
is called.
Call Pickup Groups are set up in 23-02.
Department Groups 1 ~ 64
Priority 1 ~ 9999
Default = 1
extensions in
Department
Group 1 with
priority in port
order:
Port 1 priority = 1
Port 256 priority
= 256
16-03-01
Secondary Department Group
Assign extensions to multiple Department
Groups and set the priority assignment. Each
Secondary Department Group can have up to
16 extensions assigned.
Extension Number
Maximum of eight digits
Priority Order 0 ~ 9999
No Setting
20-06-01
Class of Service for Extensions
Assign a Class of Service (1 ~ 15) to an
extension.
Day Night/Mode: 1 ~ 8
Class of Service of Extensions
(1 ~ 15)
Extension port
101 = Class 15
All other
extension port =
Class 1
20-09-07
Class of Service Options (Incoming Call
Service) – Call Queuing
Turn Off or On an extension user ability to have
calls queued if a call rings the extension when it
is busy.
Program 20-13-06 must be set to 0 (Off) for
this feature to work.
0 = Off
1 = On
COS 1 ~ 15 = 1