NEC Univerge SV9100 - Page 767

767
Program
Number
Program Name/Description
Input Data
Default
10-37-02
UPnP Setup – Retry Time
Define the retry time for UPnP.
0, 60 ~ 3600
(1 ~ 59 cannot be input)
60
10-54-01
License Configuration for Each Package –
License Code
Assign VoIP Resource Licenses (5103) to
GCD-CP10 slot (1).
If applying more than 255 licenses to a slot, the
licenses must be applied across multiple
indexes.
For example, assigning 256 VoIP resource
licenses (5103) to the CPU slot could be
assigned using different methods as long as the
total for the CPU slot is 256.
1. Index 1 has 128 of feature code 5103 and
index 2 also has 128 of feature code 5103 for a
total of 256.
2. Index 1 has 255 of feature code 5103 and
index 2 has 1 of feature code 5103 for a total of
256.
1 ~ 255 Resource Licenses
0
10-67-01
SIP Stack Configuration Setup – DNS Mode
Select whether DNS mode is enabled.
0 = Disable
1 = Enable
0
10-67-02
SIP Stack Configuration Setup – DNS IP
Address
Set the IP Address of DNS Server. The SV9100
can only use one DNS Server, two SIP Carriers
requiring their own DNS Server can’t be used.
XXX.XXX.XXX.XXX
0.0.0.0
10-67-03
SIP Stack Configuration Setup – DNS Port
Assign the DNS port.
0 ~ 65535
53
10-67-04
SIP Stack Configuration Setup – DNS
Source Port
Assign the DNS source port.
0 ~ 65535
53
10-68-01
IP Trunk Availability – Trunk Type
Assign the trunk type as (1) SIP.
0 = None
1 = SIP
2 = H.323
3 = CCIS
(Netlink System ID 0 ~ 50)
0
10-68-02
IP Trunk Availability – Start Port
Assign the Start Port for your SIP trunks.
0 ~ 400
(Netlink System ID 0 ~ 50)
0
10-68-03
IP Trunk Availability – Number of Port
Assign the number of SIP port trunks.
0 ~ 400
(Netlink System ID 0 ~ 50)
0