NEC Univerge SV9100 - Page 884

884
Guide to Feature Programming
Mobile Extension:
Program
Number
Program Name/Description
Input Data
Default
11-02-01
Extension Numbering
The Mobile Extension port must be an
unequipped extension port on the SV9100
system. This extension port is directed to an
Abbreviated Dial bin.
Maximum of eight digits.
1 101
2 102
3 103
~ ~
99 199
100 3101
~ ~
960 3961
11-10
Service Code Setup (for System
Administrator)
Customize the System Administrator service
codes.
11-11
Service Code Setup (for Setup/Entry
Operation)
Customize the service code for Setup and
Entry.
11-12
Service Code Setup (for Service Access)
Customize the service codes for Service
Access.
11-13
Service Code Setup (for Contact Centre)
Customize the service codes which are used
with the Contact Centre.
13-04-01
Speed Dialing Number and Name – Speed
Dialing Data
For the bin number defined in Program
15-22-01 for the Mobile Extension, enter the
external number of the Mobile Extension. This
must exactly match the Caller ID number of the
Mobile Extension or the user cannot access the
internal features.
(Maximum 24 digits)
1 ~ 9, 0, *, #
Pause (Press line key 1)
Recall/Flash (Press line key 2)
@ = Code to wait for answer
supervision in ISDN (Press line
key 3)
No Setting