Chassis Configuration Settings
GARD 8000 SYS RFL Electronics
April 1, 2012 7-25 973.334.3100
Teleprotection Status Definitions:
Module Location
Indicates the slot# where the module is located in the chassis.
Configured
Indicates whether the TPS module has been configured.
Comms Head Label
Displays the label given to the communications head associated with the TPS channel.
User Label
Indicates the name given to the TPS channel.
Service
This is a status indication that the TPS channel is either Enabled and In Service, or Disabled.
Major Alarm
This is a status indication, which can be either Red or Green. Currently this card does not report Major
Hardware Alarms, and therefore this indication will always be green.
Minor Alarm
This is a status indication of a Minor Hardware Alert. Can be either Green, indicating no alert, or Red,
indicating alert.
Rx Address OK
Indicates the status of the Rx address, Red indicates an alert.
Frame OK
Indicates the status of the Frame, Red indicates an alert.
Ping Pong Status
Indicates the status of the Ping Pong, Red indicates the delay threshold has been exceeded.
Ping Pong Limit
Indicates the channel delay threshold to be exceeded for alarms to be indicated.
Ping Pong Status (ms)
Indicates the last Ping Pong (one-way channel delay) time in milliseconds.
Errors Per Second
Indicates the number of CRC errors detected in the previous second.
Errored Seconds
This indicates the number of seconds in which any number of CRC errors were detected since the last
reset of the counter.
To Next Page
Loading...