EasyManua.ls Logo

RFL Electronics GARD 8000 - Page 338

RFL Electronics GARD 8000
647 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chassis Configuration Settings
GARD 8000 SYS RFL Electronics
April 1, 2012 7-102 973.334.3100
Current Differential Relay Test Database
This file defines the spreadsheets required to test the Current Differential Module.
Current Differential Relay SOE Database
Contains sequence of events which can be retrieved through the RFL web interface.
Current Differential Relay Firmware (.HEX File)
This is the operating software for the current differential relay module. This file is only loaded in the
case of a current differential software upgrade.
Metering Settings Database
This file defines the web pages that configure the Metering Module settings. It needs to be loaded only
when the metering board is updated.
Async Comms Settings Database
This file defines the web pages that configure the async comms module settings. It needs to be loaded
only when the async comms board is updated.
Async Comms Status Database
This file defines the web pages that display the async comms status. It needs to be loaded only when
the async comms board is updated.
Metering Status Database
This file defines the web pages that display the metering status. It needs to be loaded only when the
metering board is updated.
Telemetry Settings Database
This file defines the web pages that configure the Telemetry Module settings. It needs to be loaded
only when the telemetry board is updated.
Telemetry Status Database
This file defines the web pages that display the telemetry status. It needs to be loaded only when the
telemetry board is updated.
TSD Files
The GARD 8000 System supports an optional Front Panel TSD (Touch Screen Display). This display
can be uniquely configured for each customers needs. Various Setting and Status databases containing
web pages formatted for the TSD can be selected as well as customized databases. (See Section 5.4 for
further TSD information).
Using the Browse button search for and select the file to be loaded, and click the Send button. Upon
successful loading of the file, the GARD chassis will respond by displaying a web page with a message
similar to the one shown below.
Successful to send file:2IN2OUT_D.TXT to GARD 8000!

Table of Contents