Exit Stacker
The exit stacker, attached to the front of the machine, can be adjusted for output: Basket mode and
Stack mode
• Basket Mode. For standard size paper. The exit stacker is shortened so that it is rounded and
deep to hold paper in a small well.
• Stack Mode (for A0 SEF/A1 LEF). The exit stacker is extended to the front until it is flat. It can
hold up to 10 stacked sheets.
• Wire guide mode (for A1 SEF/A2 LEF). Two wire guides can be attached to the rear rod.
Overview
45
To Next Page
Loading...
