Ricoh MP CW2201 Service Manual

10. While holding the paper transport guide with both hands as shown below, insert the pegs
on either end of the guide into the cut-outs in the stand on the left [A] and right [B]. The
guide should slide into position and fit tightly after correct alignment.
• Make sure that the pegs are tight in the cut-outs: [A] (black) on the left, and [B] (white) on the
right.
2. Installation
86

Ricoh MP CW2201 Specifications

General

Color Printing	Yes
Scan Resolution	600 dpi
Standard Interfaces	Ethernet, USB
Paper Size	A4
Operating Systems	Windows
Power Source	AC 100-240V, 50/60Hz