System Programming Codes (Expert Mode Codes)
P31003-H3550-S403-4-7620, 02/05
A-6 HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
pcodes.fm
14 30 optiPoint BLF (busy lamp field or BLF), Display: No BLF, one BLF, two
BLFs
14 31 Ringback protection per station
14 32 Setup station in internal phonebook: 0 = no, 1 = yes
14 33 Edit tel. number 0 = no, 1 = yes
14 34 Monitoring: 0 = not authorized, 1 = authorized
14 35 Keypad dial: 0 = not authorized, 1 = authorized
14 36 Forwarding CFSS
15 CO call privileges
15 1 Direct trunk access day; specify reference station
Enter new data:
0 = No trunk access except by system speed-dialing
1 = Incoming only
2-7 = Allowed list, Allowed list 1-6
8-13 = Denied list, Denied list 1-6
14 = Full access
15 2 Direct trunk access night; specify reference station
Enter new data:
0 = No trunk access except by system speed-dialing
1 = Incoming only
2-7 = Allowed list, Allowed list 1-6
8-13 = Denied list, Denied list 1-6
14 = Full access
15 3 Allowed lists
15 3 1 Allowed list 1, 100 entries
15 3 2 Allowed 2, 10 entries
15 3 3 Allowed 3, 10 entries
15 3 4 Allowed 4, 10 entries
15 3 5 Allowed 5, 10 entries
15 3 6 Allowed 6, 10 entries
15 4 Denied lists
15 4 1 Denied list 1, 50 entries
15 4 2 Denied 2, 10 entries
15 4 3 Denied 3, 10 entries
Table A-3 Expert Mode Codes
Code Function
To Next Page
Loading...
