GNSS receiver settings 5 Connectivity
RangePoint RTX corrections
RangePointRTX is a satellite-based subscription service for corrections with pass-to-pass accuracy <
6" (15 cm) and GLONASS compatibility.
The GNSSreceiver in the TM-200 Module receives these signals.
To set up this correction service:
1. Unlock RangePoint RTX. (See Feature unlocks, 81.)
2.
At the Home screen, tap .
3.
Tap GNSSSetup to display the setup panel.
Setting Options
Position Quality Select the appropriate choice:
ll Favor Accuracy (Default) : Use for operations needing
highest accuracy (such as row crop planting and strip-till).
l Balanced Quality: Trades potential accuracy for longer
production time.
l Favor Availability: Expands production time further with
potential for reduced accuracy.
Convergence Threshold View the convergence level at which the system will allow you to
start guidance operations.
Version 1.075, Revision C TMX-2050 Display User Guide 119
To Next Page
Loading...
