Trimble TMX-2050 - RTK corrections

GNSS receiver settings 5 Connectivity
1. Connect the DCM-300 modem to the display.
2. Power on the DCM-300 modem and display by turning on the vehicle ignition.
3. Unlock VRS. (See Feature unlocks, 81.)
4. Reboot the DCM-300 modem by turning off the vehicle ignition.
5. Turn the vehicle ignition back on.
6.
At the Home screen, tap .
7.
Tap GNSSSetup to display the setup panel.
Setting Options
Modem
ll DCM-300
l Third Party NTRIPModem (Cannot be used with Autopilot
guidance)
xFill
(See xFill technology, 133.)
Turn on or off.
Position Quality Select the appropriate choice:
ll Favor Accuracy (Default) : Use for operations needing
highest accuracy (such as row crop planting and strip-till).
l Balanced Quality: Trades potential accuracy for longer
production time.
l Favor Availability: Expands production time further with
potential for reduced accuracy.
VRSServer Name/Address Enter the value provided by your VRSService provider.
Server Port Number Enter the value provided by your VRSService provider.
xFill Runtime
Note – Available if you
have turned on xFill.
20 minutes.
How long the display will use xFill technology after the correction
service becomes unavailable.
RTK corrections
RTK is a radio-broadcast correction service originating from a ground-based reference station, and
received by radio signal. The AG-815 integrated radio receives these signals.
Version 1.075, Revision C TMX-2050 Display User Guide 127