10 Operations Tasks
Edit a task (Field Manager)
1.
Add a task or select an existing task.
2.
Tap Continue Task to add current coverage to the selected task. The display will show the
previous related coverage on the Run screen.
Note – This option is only available if the implement you have selected is for the same type of
operation.
3.
Make sure that the Max Task Time is suitable.
a. If the implement and operation do not change, the display adds coverage to the current
task until the task exceeds the Max Task Time.
b. If the Max Task Time is not acceptable, tap the number of days to change it.
4. Tap Exit to save the changes and close the Field Manager.
240 TMX-2050 Display User Guide Version 1.075, Revision C
To Next Page
Loading...
