Trimble TMX-2050 - Satellite corrections

5 Connectivity GNSS receiver settings
Setting Options
Position Quality Select the appropriate choice:
ll Favor Accuracy (Default) : Use for operations needing highest accuracy
(such as row crop planting and strip-till).
l Balanced Quality: Trades potential accuracy for longer production
time.
l Favor Availability: Expands production time further with potential for
reduced accuracy.
Fast Restart Turn on or off.
Modem
DCM-300 is the option available.
Convergence
Threshold
Set the convergence level at which the system will allow you to start
guidance operations.
ll
Enter a convergence value closer to 12 inches for broad acre
applications to begin working promptly.
l
Enter a convergence value closer to 4 inches for row crop applications
to ensure desired accuracy is achieved before beginning work.
Satellite corrections
CenterPoint RTX Satellite Standard and CenterPoint RTX Satellite Standard Fast are satellite
broadcast subscription services for corrections with < 1.5" (3.8 cm) accuracy and GLONASS
compatibility.
The GNSSreceiver in the TM-200 Module receives these signals.
To set up either of these correction services:
1. Unlock CenterPoint RTX Satellite for standard or fast convergence. (See Feature unlocks, 81.)
2.
At the Home screen, tap .
3. Tap GNSSSetup to display the setup panel.
124 TMX-2050 Display User Guide Version 1.075, Revision C