Trimble TMX-2050 - USB VDB transfer; Office Sync data transfer

Data transfer 2 Display basics
For information on: See also:
USB socket
USB socket, 74
USB VDB transfer
When you transfer data, saved vehicles do not include the vehicle configuration file (.vdb)for
Autopilot. To transfer this configuration data:
1. Connect a laptop that has APToolbox software to the serial port of the NavController II that
contains the vehicle config file you want.
2. Using APToolbox, save the config (.cfg) file to the laptop.
3. Transfer the saved config file from the laptop to a USBdrive in the folder AgData/Profiles.
4. Insert the USB drive containing the config file in the USB socket of the TMX-2050 display.
Office Sync data transfer
With a DCM-300 modem, and a subscription to Office Sync, information can wirelessly transfer from
the display to the office or Connected Farm, including wireless upgrades. This requires:
l A Connected Farm account
l Unlock for Office Sync
l DCM-300 modem
l A data plan or access to WiFi
As part of Office Sync setup, you decide:
l How often you want the display to check the server for data transfer
l How often data is sent from the display to the office
l Whether to send the data automatically or after you have confirmed to send data
When Office Sync is transferring data, displays in the display bar.
For information on: See:
Settings for Office
Sync
Modem services settings, 88
Diagnostics
Data transfer, 67
Version 1.075, Revision C TMX-2050 Display User Guide 69