3 Display settings Firmware upgrades - wireless
l Next to the user's information in the Users and passwords section of Settings
l On the display bar when the user is logged in
1. At the Users and passwords section, Tap the user icon on the right of the user information.
2. The camera activates and displays a frame on the screen. Make sure the user's face is contained
within this frame.
3. To capture the photo, tap Capture. The photo displays on the lower right. You can continue to
tapCapture until you are satisfied with the photo.
4. When you are ready to save the photo, tap Done.
Access
To access the Users and Passwords settings:
1.
Tap .
2.
Tap .
3.
Tap Users and Passwords.
Firmware upgrades - wireless
For upgrading firmware using a USB drive, see Data transfer, 67.
To upgrade the firmware wirelessly for the TMX-2050 display, you can use one of the methods in
this section.
Note – Wireless upgrades require a DCM-300 modem, a subscription to Office Sync and a data
plan or access to WiFi.
For information on: See:
Upgrading through USB
Data transfer, 67
WiFi settings
Wi-Fi settings, 87
Settings for wireless upgrades
You can control how the display checks for upgrades and when to wirelessly download them.
1.
Tap .
2.
Tap .
80 TMX-2050 Display User Guide Version 1.075, Revision C
To Next Page
Loading...
