Trimble TMX-2050 - User, Language, and System Settings

3 Display settings Display settings
Display settings
At the TMX-2050 display, you can customize and set up many options, including but not limited to:
l Changing the language and units of measure and set the time zone
l Setting preferences for:
l
l Steering and guidance
l The point at which to begin mapping and logging
l Creating, editing and deleting user profiles
l Viewing modem settings and resetting them
l Setting up Office Sync
Languages and units settings
At this settings page, you can set:
l The language shown on the display
l The type of units of measure shown on the display
l Whether the password entry is always obscured or delayed from being obscured
Setting Tap to view or choose...
Languages The language for the display. Scroll the list and tap the language you
want on the TMX-2050 display.
Display Units The type of units you want on the display:English or Metric
Number Format Either commas or periods.
Access
To access the Language and Units settings:
1.
Tap .
2.
Tap .
3.
Tap Language and Units.
Date and time settings
The display automatically obtains time and date from the GNSS receiver in the TM-200 Module.
78 TMX-2050 Display User Guide Version 1.075, Revision C