Trimble TMX-2050 - Alerts and Warnings Management

10 Operations Alerts and warnings
Alerts and warnings
The TMX-2050 display will display warnings and alerts, depending on your features and the
situation. For example, warnings and alerts will display regarding:
l Loss of GNSS coverage
l Using auto guidance and:
l
l The vehicle is approaching a tight turns or the end of a row
l The system detects the steering wheel is being used
l A lack of interaction with the display after a specific amount of time
This list is not comprehensive, rather a few examples of alerts and warnings.
End of row warning
If your Autopilot system is on and following a guidance line, when you begin approaching the end of
a row, an End of Row warning displays.
For information on: See:
Settings
Steering and guidance settings, 85
Tight turn warning
If you are using an auto guidance system, when you are approaching a tight turn, the system
displays a tight turn warning.
To customize your settings for tight turn warnings (including the angle of the turn and how soon the
warning displays before the turn), see Patterns settings, 83.
292 TMX-2050 Display User Guide Version 1.075, Revision C