Trimble TMX-2050 - Layers; Adjustments during operation; Automatic transfer of data

10 Operations Layers
includes (but is not limited to):
l The field in which the task took place
l Time and date
l The type of operation performed
When you pause during a field activity, you can continue the same task or you can begin a new task
(if you will be performing a different type of operation). At the Field Manager, you can view the
history of tasks completed for each field.
For information on: See:
Field Manager
Field Manager, 61
Tasks
Tasks, 238
Layers
While the system is logging your field activity, you have the option to view one layer of activity at a
time. For example, you can view overlaps in coverage or the speed of your vehicle throughout the
operation. You must have logging on to see layers of coverage.
For information on: See:
Layers
Layers, 267
Adjustments during operation
While you are performing field activities, you can make adjustments to:
l Steering (see Steering adjustments, 244)
l Guidance patterns (see Guidance adjustments, 244)
l Boom height (see Boom height adjustments, 278)
l Field IQ operations (see Field-IQ system operations, 270)
Automatic transfer of data
The TMX-2050 display can wirelessly transfer information recorded during your field activities to
Connected Farm and the office. This requires:
l A DCM-300 modem
l A subscription to Office Sync
236 TMX-2050 Display User Guide Version 1.075, Revision C