3 Display settings Display settings
Manual code entry
1. Tap the Code text box and enter the code.
2. If the system accepts the code, tap Accept.
3. If the system rejects the code, you can try again or contact your reseller for help.
QRcode scan
1. Tap Read QR.
2. Hold your code image in front of the camera for it to be read.
3.
If the system accepts the code, Tap Accept.
4. If the system rejects the code, you can try again or contact your reseller for help.
Check for unlocks
1. Tap Check for Unlocks.
2. The request will be sent for the display to check for any available service or licenses. It may take
several minutes for the unlocks to be processed.
Display settings
These are basic settings for the display.
Setting Tap to...
Manually Change Brightness Adjust brightness of the TMX-2050 display's backlight.
Volume Adjust the volume of the sound.
Touch Screen Sounds Turn on or off sounds associated with using the display.
Access
To access the Display settings:
1.
Tap .
2.
Tap .
3.
Tap Display.
82 TMX-2050 Display User Guide Version 1.075, Revision C
To Next Page
Loading...