Trimble TMX-2050 - Connectivity and Network Settings

ISOBUS settings 3 Display settings
ISOBUS settings
Task Controller
To use Task Controller when using ISO-certified equipment, tap to activate this feature.
Note – This feature is optional and requires an unlock.
For information on: See:
Task Controller implement
setup
Implement setup for Task Controller, 191
Setting up equipment for
task controller
Equipment setup, 195
Using Task Controller
Task Controller operation, 282
and
ISOBUS Task Controller widget,
288
Virtual Terminal
To use Virtual Terminal when using ISO-certified equipment, tap to activate this feature.
For information on: See:
Using Virtual Terminal
Virtual Terminal operation, 284
and
Virtual Terminal widget, 290
Access
To access the ISOBUS settings:
1.
Tap .
2.
Tap .
3.
Tap ISOBUSSettings.
Wi-Fi settings
With a DCM-300 modem and additional subscription services, WiFi enables you to transfer data
wirelessly from vehicle to office. You can use WiFi in addition to or instead of the cellular network.
At Wi-Fi network settings, turn on Wi-Fi.
At Available Networks, tap Refresh to scan for additional networks you can connect to.
Version 1.075, Revision C TMX-2050 Display User Guide 87