Coverage logging 10 îîOperations
Coverage logging
Coverage logging:
l Records the area that you have covered when you carry out an operation, for example applying
fertilizer to a field
l Allows you to see different map layers of your coverage as you are working in the field.
Manual coverage logging
To activate coverage logging, tap .
Automatic logging with engage
If your system has been configured to do so, coverage will start when your auto guidance system is
engaged. Coverage will stop when auto guidance is disengaged. To turn on this capability, see
Patterns settings, 83.
If automatic logging is activated, you can still turn logging on or off when engaged or when
disengaged.
Editing layers
To edit settings for layers, see Edit a coverage layer, 268.
Version 1.075, Revision C TMX-2050 Display User Guide 241
To Next Page
Loading...