Trimble TMX-2050 User Manual

Prescriptions 10 Operations
12. Tap When outside Prescription and tap one of the following: Close, Last Rate or Default Rate.
Tap .
13.
Tap Default Rate and enter the rate. Tap .
14. If you have completed the information, tap Finish.
15. If you need to change previous information, tap Back.
16.
To save your entries, tap .
17.
To discard your entries, tap .
For information on: See:
Prescriptions Manager
Prescriptions Manager, 66
Importing prescriptions
Importing prescriptions, 223
Exporting prescriptions
Exporting prescriptions, 223
Use a prescription
Use a prescription, 281
Use a prescription
Before you can use a prescription, you must:
l Have a field selected
l Assign the prescription to a channel
To use a prescription, complete the following steps.
1. Make sure you have a field selected.
2.
At the Run screen, tap . The rate control adjustment buttons display.
3.
To begin using the prescription, tap . The other (buttons?) will become gray and cannot
be tapped unless you stop using the prescription.
4.
To stop using the prescription, tap .
Version 1.075, Revision C TMX-2050 Display User Guide 281

Trimble TMX-2050 Specifications

General

Brand	Trimble
Model	TMX-2050
Category	Monitor
Language	English