Trimble TMX-2050 - GNSS Setup and Antenna Installation

4 Installation Installation and GNSS set up
Installation and GNSS set up
1.
Install the equipment required for the type of correction service you will be using.
Correction type Install...
Autonomous GNSS antenna
CenterPoint RTK
Ag-815
Radio antenna
GNSS antenna
CenterPoint RTXSatellite
GNSSantenna
CenterPoint RTXModem
DCM-300 modem
Cellular antenna
GNSSantenna
OmniSTARG2/HP
GNSS antenna
RangePoint RTX
GNSS antenna
SBAS
GNSSantenna
VRS
DCM-300 modem
Cellular antenna
GNSSantenna
2.
Set up at least one vehicle. See Vehicle setup, 140.
You will not be able to receive a normal GNSS signal until you set up a vehicle.
3. Set up GNSS. See GNSS receiver settings, 116
102 TMX-2050 Display User Guide Version 1.075, Revision C