Run screen 2 Display basics
CAUTION – Do not press on the screen with a sharp item, such as a pencil. You may damage the surface of the
screen.
The Run screen enables you to perform field operations such as:
l Creating guidance boundaries and patterns
l Accessing Field Manager to edit and refine guidance boundaries and patterns
l Using auto guidance (with Autopilot, EZ-Pilot or EZ-Steer)
l Controlling sections automatically or manually (with Field-IQ)
l Controlling rate application for liquids (with Field-IQ)
l Controlling boom height automatically (with Field-IQ)
l Planting and nutrient pest management (in a future release)
l Harvesting (in a future release)
l Monitoring seeding (in a future release)
l Row guidance and implement control (in a future release)
l Water management (in a future release)
Before you can enter the Run screen to perform field activities, you must:
l Select a vehicle (see Select a vehicle, 145)
l Select an implement (see Select an implement, 189)
l Select a field (see Select a field, 182)
l Have a GNSSconnection(see GNSS receiver settings, 116)
For more information on selecting a vehicle, field and implement, see Preparing for operation, 234.
Buttons on the Run screen include:
l Field operation buttons - left side, 57 on the left side of the screen
l Feature operation buttons - right side, 59 on the right side of the screen
Field operation buttons - left side
Buttons for field operation enable you to create guidance and landmark elements, view map layers,
show or hide status widgets and access Field Manager.
Version 1.075, Revision C TMX-2050 Display User Guide 57
To Next Page
Loading...
