GNSS receiver settings 5 Connectivity
1. Unlock OmniSTAR G2/HP/GR. (See Feature unlocks, 81.)
2.
At the Home screen, tap .
3. Tap GNSSSetup to display the setup panel.
Setting Options
Position Quality Select the appropriate choice:
l Favor Accuracy (Default) : Use for operations needing highest
accuracy (such as row crop planting and strip-till).
l Balanced Quality: Trades potential accuracy for longer
production time.
l Favor Availability: Expands production time further with
potential for reduced accuracy.
Fast Restart
Choose a Fast Restart option:
l On (Default): Reduces the time for position to converge so that
the system is ready for operation faster. Tap On when the
vehicle is parked in an area with a clear view of the sky, and will
not be moved until next use.
l Off: Does not use Fast Restart.
Convergence Threshold
Set the convergence level at which the system will allow you to start
guidance operations.
l
Enter a convergence value closer to 12 inches for broad acre
applications to begin working promptly.
l
Enter a convergence value closer to 4 inches for row crop
applications to ensure desired accuracy is achieved before
beginning work.
Correction Satellite
Selection
Tap Auto Select for automatic satellite selection, or select a satellite
from the list. If you choose CUSTOM, enter the Frequency and
Baud Rate.
CenterPoint RTX setup
There are three types of CenterPoint RTX corrections:
l Modem
l Satellite Standard
l Satellite Fast Convergence
Version 1.075, Revision C TMX-2050 Display User Guide 121
To Next Page
Loading...
