3 Display settings Patterns settings
Setting Tap to view or change...
Smooth Turn Radius The size of the circle that the system will guide to. The larger the
circle (degrees), the wider the turn.
Tight Turn Warning Angle The number of degrees that will trigger a warning about a tight
turning angle. See
Tight turn warning, 292
.
Tight Turn Look Ahead Time The number of seconds before you approach a tight turn angle that
the warning will show on the display. See
Tight turn warning, 292
.
Headlands
Setting Tap to view or change...
Auto Close
Automatically closes the beginning and end point when you create
boundaries and headlands.
See Headland and infill pattern creation (Run screen), 253.
Auto Close Distance
The distance between your beginning point and ending point for a
headland.
See Headland and infill pattern creation (Run screen), 253.
Boundaries
Setting Tap to view or change....
Auto Close Automatically closes the beginning and end point when you create
boundaries. See
Boundary creation (Run screen), 248
.
Auto Close Distance The distance between your beginning point and ending point for a
boundary.
Access
To access the Patterns settings:
1.
Tap .
2.
Tap .
3.
Tap Patterns.
84 TMX-2050 Display User Guide Version 1.075, Revision C
To Next Page
Loading...
