Trimble TMX-2050 - Prescriptions; Assign a prescription

10 Operations Prescriptions
Prescriptions
At the Run screen, tap to open the Prescriptions Manager. You can use the Prescriptions
Manager to assign a prescription to a channel.
For information on: See:
Prescriptions Manager
Prescriptions Manager, 66
Import prescriptions
Importing prescriptions, 223
Export prescriptions
Exporting prescriptions, 223
Assign a prescription
Assign a prescription, 280
Use a prescription
Use a prescription, 281
Assign a prescription
Before you can assign a prescription, you must:
l Have a field selected
l Have a channel set up
To assign a prescription:
1. Make sure you have a field selected.
2.
At the Run screen, tap . The Prescriptions Manager displays.
3. In the Enabled Channels list on the left, tap the channel you want to assign the prescription to.
4. On the right, tap Prescription File Name. The TMX-2050 display displays a list of prescription
files that are available for the field you selected.
5.
Tap the prescription file you want and tap .
6. Tap Next.
7. Tap Column Name. The list of column names displays.
8.
Tap the column you want to use, then tap .
9.
Tap Column Units, then tap either gal/a or L/ha. Tap .
10. Tap Next.
11.
Optionally, tap Lead Time and enter the number of seconds (0 - 10). Tap .
280 TMX-2050 Display User Guide Version 1.075, Revision C