Application control 8 Implements
to confirm the removal. Otherwise, tap to cancel the removal.
6. When you finish making changes, tap Summary at the top right corner of the screen.
7.
If any part of the setup is Not Complete, you can save the changes but you cannot use the
implement on the Run screen.
8.
To save the channel and return to the Application Control section , tap . The display returns
you to the Implement setup panel.
9.
To exit channel setup without saving, tap . The display returns you to the Implement
setup panel.
Version 1.075, Revision C TMX-2050 Display User Guide 209
To Next Page
Loading...
