9 Materials Add a material
4.
Tap each setting and then select or enter a value.
Tap... To...
Material Name
Tap the text entry box and then use the on-screen keyboard to enter a
name for the material.
Material
Category
Select the type of material being applied:
ll Anhydrous
l Granular fertilizer
l Granular seed
l Liquid
l Row crop seed
Type Type of material (see
Material list, 226
)
Distributed Units Select the units to use with the selected material.
Target 1 Control the volume that the implement supplies when Rate 1 is selected.
Target 2 Control the volume that the implement supplies when Rate 2 is selected.
Rate Increment Set rate increment. When you increment/decrement Rate 1 or Rate 2 on
the Run screen, the current application rate increases or decreases by this
amount.
Minimum Rate Set the minimum rate that will be applied.
Maximum Rate Set the maximum rate that will be applied.
Material Details
(optional)
Set additional details, if needed:
ll EPA Product Number: Enter the registration number for the material
from the environmental protection agency for the area, if applicable.
l Manufacturer: Enter the material manufacturer's name.
l Restricted Use: Tap Yes or No to record whether use of the material is
restricted by local, regional, or national laws.
l Posting required
l Buffer Distance: Enter the buffer distance from the product label of
the material.
l Max Wind Speed: Enter the maximum wind speed from the product
label of the material.
l Notes: Enter any other notes that you want to record with the
material.
5.
Tap each setting and then select or enter a value.
228 TMX-2050 Display User Guide Version 1.075, Revision C
To Next Page
Loading...
