Xerox Phaser 6500 Service Manual

3-162 Xerox Internal Use Only Phaser 6500/WorkCentre 6505 Service Manual
Error Messages and Codes
PCI Bus# (0/1) Error Detected / PCI Bus# (0/1) Host Bridge Controller Error
/ PCI Error Messages received from Bus#0-Device# (0/1)
Applicable Error Codes
• 116-361 / 116-362 / 116-363 / 116-366 / 116-368 / 116-369
Collate Full
Applicable Error Code
• 116-721
Troubleshooting Reference Table
Applicable Parts Wiring and Plug/Jack Map References
■ IP Board (ESS) (SFP PL8.1.7; MFP
PL8.1.2)
■
Troubleshooting Procedure
Step Actions and Questions Yes No
1 Cycle the power Off, then On.
Does the error still occur?
Replace the IP
Board. (SFP,
page 8-120;
MFP,
page 8-144)
Complete.
Troubleshooting Procedure
Step Actions and Questions Yes No
1 Cycle the power Off, then On.
Does the error still occur?
Go to step 2. Complete.
2 Check RAM Disk size settings.
Does the error occur when printing
after reducing the size setting of the
RAM Disk?
Split the
document into
blocks to
decrease the
number of
pages to be
collated.
Complete.
http://www.manuals4you.com

Xerox Phaser 6500 Specifications

General

Monthly Duty Cycle	Up to 40, 000 pages
Duplex Printing	Manual
Print Technology	Laser
Maximum Print Resolution	600 x 600 x 4 dpi
First Page Out Time	As fast as 12 seconds
Connectivity	USB 2.0, Ethernet
Paper Capacity	250 sheets + 1 sheet bypass tray
Supported Operating Systems	Windows, Mac OS, Linux
Print Speed	Up to 24 ppm (color) / Up to 24 ppm (black)