Xerox Phaser 6500

Phaser 6500/WorkCentre 6505 Service Manual Xerox Internal Use Only 8-195
Service Parts Disassembly
IIT Sub-Assembly
PL 10.9.2
Caution
The Ferrite Core (PL 10.9.4) strung on the IIT Sub-Assembly ribbon cable is
extremely fragile.
1. Perform the service preparation steps on page 8-3.
2. Open the Front Cover.
3. Remove the MFP Left Side Cover (page 8-37).
4. Remove the Outer Pole Cover (page 8-39).
5. Remove the IP Board Shield (page 8-142).
6. Remove the MFP Right Side Cover (page 8-40).
7. Remove the Inner Pole Cover (page 8-44).
8. Remove the Lower Scanner Cover (page 8-46).
9. Remove the Front USB Assembly. (page 8-158)
10. Remove the ADF Input Tray (page 8-191).
11. Remove the ADF Assembly (page 8-192).