8-158 Xerox Internal Use Only Phaser 6500/WorkCentre 6505 Service Manual
Service Parts Disassembly
Front USB Assembly
PL10.1.95 (Kit PWB Assy Front USB)
1. Perform the service preparation steps on page 8-3.
2. Open the Front Cover.
3. Remove the MFP Left Side Cover (page 8-37).
4. Remove the Outer Pole Cover (page 8-39).
5. Remove the IP Board Shield (page 8-142).
6. Unplug connector P/J2 on the Front USB Assembly.
7. Remove the screws (one silver, 6mm; one silver, tap, 8mm) that attach the USB
Bracket Assembly (PL10.1.14) to the printer, and remove the USB Bracket
Assembly.
s6500-491
P/J2
http://www.manuals4you.com
To Next Page
Loading...
