Xerox WorkCentre 3615 Service Manual

Specifications
Phaser 3610, WorkCentre 3615 Service Manual8-32
FAX Specifications (3615)
FAX Communication
Communication Mode
The supported communication modes and priorities are as follows:
• Priority 1: ITU-T Super G3
•Priority 2: ITU-T G3 ECM
•Priority 3: ITU-T G3
ITU: International Telecommunication Union
ITU-T: ITU Telecommunication Standardization Sector
ECM: Error Correction Mode
Pixel transmission density
Pixel transmission density on the supported transmission path is as follows:
• R16 x 15.4 line/mm
• R8 x 15.4 line/mm
• R8 x 7.7 line/mm
• R8 x 3.85 line/mm
• 400 x 400 pixel/25.4mm (PHOTO - Grayscale)
• 300 x 300 pixel/25.4mm (SUPERFINE)
• 200 x 200 pixel/25.4mm (FINE)
• 200 x 100 pixel/25.4mm (STANDARD)
Modem Signal Processing
The following communication standards are supported:
• V.34 (33.6 /31.2 /28.8 /26.4 /24 /21.6 /19.2 /16.8 /14.4 /12 /9.6 /7.2 /4.8 /2.4kbps)
• V.17 (14.4 /12 /9.6 /7.2kbps)
• V.29 (9.6 /7.2kbps)
• V.27ter (4.8 /2.4kbps)
Halftone/Compression Method
1bit, JBIG, MMR, MR, MH encoding.
Communication Control Procedure
Complies with ITU-T recommendation T.30.

Xerox WorkCentre 3615 Specifications

General

Print Technology	Laser
Print Resolution	Up to 1200 x 1200 dpi
Fax	Yes
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory (Standard)	256 MB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Print Speed	47 ppm
Scan Resolution	600 x 600 dpi
Automatic Document Feeder	50 sheets
Connectivity	Ethernet
First Page Out Time (Copy)	8.5 seconds
Paper Capacity	250 sheets
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac, Linux