TFTP Configuration Commands 1001
View
FTP Client view
Parameter
None
Description
Use the verbose command to enable the client to display the commands received
from/sent to the server.
Use the undo verbose command to disable the client from display the commands
received from/sent to the server
By default, the VERBOSE is enabled and the client displays the commands received
from/sent to the server.
Example
# Enable VERBOSE.
<SW8800> ftp
[ftp]verbose
TFTP Configuration
Commands
tftp get Syntax
tftp tftp-server get source-file [ dest-file ]
View
User view
Parameter
tftp-server: IP address or hostname of the TFTP server. The name of the TFTP server
should be a string ranging from 1 to 20 characters.
source-file: Filename of the source file on the TFTP server.
dest-file: Filename of the destination file which will be saved on the switch.
Description
Use the tftp get command to download a file from the specified directory of the
TFTP server and saving it on the switch.
Related command: tftp put.
Example
# Download the file LANSwitch.app from the TFTP server at 1.1.3.214 and save it
as vxWorks.app on the local switch.
<SW8800> tftp 1.1.3.214 get LANSwitch.app vxWorks.app
To Next Page
Loading...
