BGP Configuration Commands 537
[3Com-bgp] peer test route-policy test-policy export
peer route-policy import Syntax
peer { group-name | peer-address } route-policy route-policy-name import
undo peer { group-name | peer-address } route-policy route-policy-name import
View
BGP view
Parameter
group-name: Name of peer group.
peer-address: IP address of the peer.
route-policy-name: The specified Route-policy.
Description
Use the peer route-policy import command to assign the Route-policy to the
route coming from the peer/peer group.
Use the undo peer route-policy import command to delete the specified
Route-policy.
By default, the peer/peer group has no Route-policy association.
The priority of the inbound filter policy configured for the peer is higher than that
configured for the peer group.
Related command: peer route-policy export.
Example
# Apply the Route-policy named test-policy to the route coming from the peer
group test.
[3Com-bgp] peer test route-policy test-policy import
peer
route-update-interval
Syntax
peer group-name route-update-interval seconds
undo peer group-name route-update-interval
View
BGP view
Parameter
group-name: Specifies the name of the configured peer group.
seconds: The minimum interval of sending route update message. The range is
from 0 to 600 seconds. By default, the advertisement interval is 5 seconds for
internal peer/peer group, and 30 seconds for external peer/peer group.
To Next Page
Loading...
