3Com 8807 - Traffic-Priority

266 CHAPTER 17: QOS COMMANDS
the Local-precedence + Conform-level-> 802.1p priority mapping table. For details
about the two mapping tables, see the qos conform-level, dscp and
local-precedence commands.
Example
# Set traffic limitation for the packets match the permitted rules in the ACL 4000:
CIR is 200 kbps, CBS is 2000 bytes, EBS is 2500 bytes, drop the excessive packets.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800]interface ethernet2/1/1
[SW8800] traffic-limit inbound link-group 4000 200 2000 2500 conform
remark-policed-service exceed drop
traffic-priority Syntax
Command Format Which Only Applies IP Group ACL
traffic-priority inbound ip-group { acl-number | acl-name } [ rule rule [
system-index index ] ] { auto | remark-policed-service { trust-dscp | dscp
dscp-value | untrusted dscp dscp-value cos cos-value local-precedence
local-precedence drop-priority drop-level } }
undo traffic-priority inbound ip-group { acl-number | acl-name } [ rule rule ]
Command Format Which Applies IP Group and Link Group ACL at Same
time
traffic-priority inbound ip-group { acl-number | acl-name } { rule rule
link-group { acl-number | acl-name } [ rule rule [ system-index index ] ] |
link-group { acl-number | acl-name } rule rule } { auto | remark-policed-service
{ trust-dscp | dscp dscp-value | untrusted dscp dscp-value cos cos-value
local-precedence local-precedence drop-priority drop-level } }
undo traffic-priority inbound ip-group { acl-number | acl-name } { rule rule
link-group { acl-number | acl-name } [ rule rule ] | link-group { acl-number |
acl-name } rule rule }
Command Format Which Only Applies Link Group ACL
traffic-priority inbound link-group { acl-number | acl-name } [ rule rule [
system-index index ] ] { auto | remark-policed-service { trust-dscp | dscp
dscp-value | untrusted dscp dscp-value cos cos-value local-precedence
local-precedence drop-priority drop-level } }
undo traffic-priority inbound link-group { acl-number | acl-name } [ rule rule ]
View
Ethernet port view, port group view
Parameter
inbound: Sets traffic priority for inbounds packets at the port.
ip-group { acl-number | acl-name }: Activates IP ACLs, including basic and
advanced ACLs. acl-number: Sequence number of ACL, ranging from 2000 to