156 CHAPTER 11: ETHERNET LINK AGGREGATION CONFIGURATION COMMANDS
Description
Use the lacp port-priority command to configure port priority.
Use the undo lacp port-priority command to restore the default port priority.
Related command: display link-aggregation verbose and display
link-aggregation interface.
Example
# Set port priority to 64.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] interface Ethernet1/1/1
[3Com-Ethernet1/1/1] lacp port-priority 64
lacp system-priority Syntax
lacp system-priority system-priority-value
undo lacp system-priority
View
System view
Parameter
system-priority-value: System priority, in the range of 0 to 65,535. By default, it is
32,768.
Description
Use the lacp system-priority command to configure system priority.
Use the undo lacp system-priority command to restore the default system
priority.
Related command: display lacp system-id.
Example
# Set system priority to 64.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] lacp system-priority 64
link-aggregation Syntax
link-aggregation interface-name1 to interface-name2 [ both ]
View
System view
Parameter
interface-name1: Starting range value of Ethernet port joined the Ethernet link
aggregation.
To Next Page
Loading...
