3Com 8807 - Display Mac-Address; Display Mac-Address Aging-Time

12
MAC ADDRESS TABLE MANAGEMENT
COMMANDS
MAC Address Table
Management
Commands
display mac-address
aging-time
Syntax
display mac-address aging-time
View
Any view
Parameter
None
Description
Use the display mac-address aging-time command to view the aging time of
the dynamic entry in the MAC address table.
Related command: mac-address, mac-address timer, display mac-address.
Example
# Display the aging time of the dynamic entry in the MAC address table.
<SW8800> display mac-address aging-time
mac-address aging-time: 300s
The above information indicates that the aging time of the dynamic entry in the
MAC address is 300s.
display mac-address Syntax
display mac-address [ mac-addr [ vlan vlan-id ] | [ static | dynamic ] [ interface
interface-type interface-number ] [ vlan vlan-id ] [ count ] ]
View
Any view
Parameter
mac-addr: Specifies the MAC address.
vlan-id: Specifies the VLAN ID.
static: Static table entry, that is no aging, If the configuration is saved, it can be
restored after the switch is reset.