312 CHAPTER 21: AAA AND RADIUS/HWTACACS PROTOCOL CONFIGURATION COMMANDS
domain domain-name: Configures to cut the connection according to ISP
domain. domain-name specifies the ISP domain name with a character string not
exceeding 24 characters. The specified ISP domain shall have been created.
mac mac-address: Configures to cut the connection of the supplicant whose MAC
address is mac-address. The argument mac-address is in the hexadecimal format
(x-x-x).
radius-scheme radius-server-name: Configures to cut the connection according
to RADIUS scheme name. radius-server-name specifies the RADIUS server name
with a character string not exceeding 32 characters.
interface interface-type interface-num: Configures to cut the connection
according to the port.
ip ip-address: Configures to cut the connection according to IP address.
vlan vlanid: Configures to cut the connection according to VLAN ID. Here, vlanid
ranges from 1 to 4094.
ucibindex ucib-index: Configures to cut the connection according to ucib-index.
Here, ucib-index ranges from 0 to 2311.
user-name user-name: Configures to cut the connection according to user name .
user-name is the argument specifying the username. It is a character string not
exceeding 32 characters, excluding "/", ":", "*", "?", "<" and ">". The @
character can only be used once in one username. The pure username (the part
before @, namely the user ID) cannot exceed 55 characters.
Description
Use the cut connection command to disconnect a user or a category of users by
force.
Related command: display connection.
Example
# Cut all the connections in the ISP domain, 3com163.net.
[SW8800] cut connection domain 3com163.net
display connection Syntax
display connection [ access-type { dot1x | gcm } | domain domain-name |
hwtacacs-scheme hwtacacs-scheme-name | interface interface-type
interface-number | ip ip-address | mac mac-address | radius-scheme
radius-scheme-name | vlan vlanid | ucibindex ucib-index | user-name user-name
]
View
Any view
Parameter
access-type dot1x: Configures to display the user connections that are of the
specified access category.
To Next Page
Loading...
