3Com 8807 - Port Hybrid Ip-Vlan Vlan

IP Subnet-Based VLAN Configuration Commands 89
Description
Use the display vlan-ip interface command to display the information of the IP
subnet-based VLAN configured on a specified port. You can refer to this command
for using an IP subnet-based VLAN and adding/deleting an IP subnet-based VLAN.
Related command: display interface.
Example
# Display the information of the IP subnet-based VLANs configured on all the
ports.
<SW8800> display vlan-ip interface all
Interface: GigabitEthernet2/1/1
Vlan-ID Index Type Value
11 0 IPv4 2.2.7.0 255.255.255.0
11 1 IPv4 2.2.8.0 255.255.255.0
11 2 IPv4 2.2.9.0 255.255.255.0
11 3 IPv4 2.2.10.0 255.255.255.0
11 4 IPv4 2.2.3.0 255.255.255.0
11 5 IPv4 2.2.4.0 255.255.255.0
11 6 IPv4 2.2.5.0 255.255.255.0
11 7 IPv4 2.2.6.0 255.255.255.0
Interface: Ethernet6/1/1
Vlan-ID Index Type Value
10 0 IPv4 1.2.3.0 255.255.255.0
10 1 IPv4 1.2.4.0 255.255.255.0
10 2 IPv4 1.2.5.0 255.255.255.0
10 3 IPv4 1.2.6.0 255.255.255.0
10 4 IPv4 1.2.7.0 255.255.255.0
10 5 IPv4 1.2.8.0 255.255.255.0
10 6 IPv4 1.2.9.0 255.255.255.0
10 7 IPv4 1.2.10.0 255.255.255.0
port hybrid ip-vlan vlan Syntax
port hybrid ip-vlan vlan vlan-id
undo port hybrid ip-vlan vlan vlan-id
View
Ethernet port view
Parameter
vlan-id: Specifies the ID of the IP subnet-based VLAN to be delivered or deleted.
Description
Use the port hybrid ip-vlan vlan command to associate a specified port with an
IP subnet-based VLAN.
Use the undo port hybrid ip-vlan vlan command to dissociate a specified port
from an IP subnet-based VLAN.
Related command: display vlan-ip vlan { vlan-list | all }.