Ethernet Link Aggregation Configuration Commands 151
Use the undo debugging link-aggregation error command to disable link
aggregation error debugging.
Example
# Enable link aggregation error debugging.
<SW8800> debugging link-aggregation error
debugging
link-aggregation event
Syntax
debugging link-aggregation event
undo debugging link-aggregation event
View
User view
Parameter
None
Description
Use the debugging link-aggregation event command to enable link
aggregation event debugging.
Use the undo debugging link-aggregation event command to disable link
aggregation event debugging.
Example
# Enable link aggregation event debugging.
<SW8800> debugging link-aggregation event
display lacp system-id Syntax
display lacp system-id
View
Any view
Parameter
None
Description
Use the display lacp system-id command to display the device ID of local system,
including system priority and system MAC address.
Related command: link-aggregation.
Example
# Display the device ID of the local system.
<SW8800> display lacp system-id
Actor System ID: 0x8000, 00e0-fc00-0100
To Next Page
Loading...
