BPDU Tunnel Configuration Commands 213
15
BPDU TUNNEL CONFIGURATION
COMMANDS
BPDU Tunnel
Configuration
Commands
vlan-vpn enable Syntax
vlan-vpn enable
undo vlan-vpn
View
Ethernet port view
Parameter
None
Description
Use the command vlan-vpn enable to enable VLAN VPN (QinQ) on the port.
Use the undo vlan-vpn command to disable VLAN VPN (QinQ) on the port.
By default, VLAN VPN is disabled on all the ports.
Example
# Enable VLAN VPN on the switch. note2
<SW8800>system-view
System View: return to User View with Ctrl+Z.
[SW8800] interface Ethernet3/1/3
[3Com-Ethernet3/1/3]vlan-vpn enable
vlan-vpn tunnel Syntax
vlan-vpn tunnel
undo vlan-vpn tunnel
View
System view
To Next Page
Loading...
