8
IP PERFORMANCE CONFIGURATION
COMMANDS
IP Performance
Configuration
Commands
display fib Syntax
display fib
View
Any view
Parameter
None
Description
Use the display fib command to view the entries of the forwarding information
base. Each line outputs indicates a FIB entry. The information includes destination
address/mask length, next hop, current flag, timestamp and outbound interface.
Example
# Display the entries of the Forwarding Information Base.
<SW8800> display fib
Destination/Mask Nexthop Flag TimeStamp Interface
10.153.17.0/24 10.153.17.99 U t[0] Vlan-interface1
10.153.18.88/32 127.0.0.1 GHU t[0] InLoopBack0
10.153.18.0/24 10.153.18.88 U t[0] LoopBack0
10.153.17.99/32 127.0.0.1 GHU t[0] InLoopBack0
127.0.0.0/8 127.0.0.1 U t[0] InLoopBack0
Tab le 12 Description on the fields of the display fib command
Field Description
Destination/Mask Destination address/Mask length
Nexthop The forwarding next hop address
To Next Page
Loading...
