3Com 8807 - Debugging Dns; Display Ip Host

862 CHAPTER 48: DNS CONFIGURATION COMMANDS
display ip host Syntax
display ip host
View
Any view
Parameter
None
Description
Use the display ip host command to view all the host names and the
corresponding IP addresses.
Example
# Display all host names and the corresponding IP addresses of the hosts.
<3Com< display ip host
Host Age Flags Address
My 0 static 1.1.1.1
Aa 0 static 2.2.2.4
Dynamic DNS
Configuration
Commands
debugging dns Syntax
debugging dns
undo debugging dns
View
User view
Parameter
None
Description
Use the debugging dns command to enable DNS debugging.
Use the undo debugging dns command to disable DNS debugging.
By default, DNS debugging is disabled.
Tabl e 112 Description on the fields of the display ip host command
Field Description
Host Host name
Age Valid period
Flags Flags
Address Host IP address