3Com 8807 - Display Dhcp Server Tree

DHCP Server Configuration Commands 839
Dhcp Inform: 0
Boot Reply: 4
Dhcp Offer: 1
Dhcp Ack: 3
Dhcp Nak: 0
Bad Messages: 0
display dhcp server tree Syntax
display dhcp server tree { pool [ pool-name ] | interface [ vlan-interface
vlan-id ] | all }
View
Any view
Parameter
pool [ pool-name ]: Specifies a global address pool. If you do not specify a global
address pool, all global address pools are included.
interface [ vlan-interface vlan-id ]: Specifies the address pool of a VLAN
interface. If you do not specify a VALN interface, address pools of all VLAN
interfaces are included.
all: Specifies all addresses pools.
Description
Use the display dhcp server tree command to display information about DHCP
address pool hierarchy.
Tab le 108 Description on the fields of the display dhcp server statistics command
Field Description
Global Pool The information followed is about the statistics of the global address
pools
Interface Pool The information followed is about the statistics of the address pools of
VLAN interfaces
Pool Number Number of address pools
Auto Number of automatically bound IP addresses
Manual Number of manually bound IP addresses
Expire Number of expired IP addresses
Boot Request: 6
Dhcp Discover: 1
Dhcp Request: 4
Dhcp Decline: 0
Dhcp Release: 1
Dhcp Inform: 0
Total and categorized DHCP packets received by the DHCP server
Boot Reply: 4
Dhcp Offer: 1
Dhcp Ack: 3
Dhcp Nak: 0
Total and categorized DHCP packets sent by the DHCP server
Bad Messages Number of bad DHCP packets